The wrought iron industry is the cornerstone of the U.S. economy, employing millions of Americans.According to the Bureau of Labor Statistics, the industry employs nearly 14 million people, employing roughly 13 million workers.It's worth a lot of money to workers, too.The industry's wages are a whopping $1.2 trillion per year.In 2016, the average worker made an average wage of $30,000 per year, ac...
The basic process of making wrought iron hinges and other knobs is the same as making other decorative pieces.
The main difference is the tooling.
Here are some of the tools you’ll need.
The Wrought-Iron Lid HammerThe lid hammer is a small tool that is used to lift the wrought iron out of the holes in a door.
The lidhammer is typically used to remove the handles and other decorative parts.
This is the most common tool used in the home.2.
The ScrewdriverFor this type of tool, you will need a hammer and a screwdriver.
The screwdriver is used for lifting the handles off of the hinges.3.
A Small Saw or DrillThe small saw is a sharp piece of wood that you can use to cut or break the edges of a door hinge.
The hole in the door is where the screwdriver will be used to drive the lid-hammer into the hole.
The saw will be sharp enough to cut through the handles if you’re not careful.4.
A Drill BitThe drill bit is a bit of metal that you place in the hole you want to drill and then use to drill the hole with the lids.
If you use the drill bit to drill through a door with the hinges on, you’ll be able to see what you’re doing in the video.
The bit will not be sharp and will cause a bit to slip into the hinge.5.
A LighterIf you have a lighter, you can place it on the screw and drive it into the hinges and then you can light it on fire.
The light will also light the hinges to make them glow.6.
A Glass BongThe glass bong is a glass pipe that you attach to a metal pipe that has a hole in it.
The pipe will hold the pipe and make it easier to work with.7.
A Rubber GlueThe rubber glue is a thick, sticky material that you put on the hinges that you want them to lock.
You can find it at hardware stores or at craft stores.
The glue will help hold the hinges together.8.
A WirecutterThe wirecutter is a tool that you use to make cutting marks in the metal of a piece of metal.
You use the wirecutters to cut out a piece, then use the metal to cut a hole for the tool to go through.9.
A Pencil or SharpieA pencil or sharpie is a kind of sharpening stone that you apply to a piece that you are going to use to work on.
You will then use it to make marks on the metal.10.
A Baking SodaCanning soda is a chemical used to preserve food in refrigerated containers.
If it is too hot to canning the food, you pour it into a glass or plastic container and let it cool for a while.
When it cools to the right temperature, you just add water.
You then use that water to can the food.